Satonat - Satin Finishing Plaster

It is a high-adhesion, paint-undercoat finishing plaster. It can be applied to plaster surfaces plastered with both PERONAT and MAKONAT, as well as to plasterboard surfaces.

APPLICATION SURFACE AND ENVIRONMENT

- The surface must be free of dirt, oil, paint, and other contaminants. - Extremely dry, hot, and highly absorbent surfaces should be moistened with water. - Care should be taken to ensure there is no air current or draft during application. - The application temperature should be between +5 and +40°C.

APPLICATION

Place 6.5-7 liters of water in the mixing container. Sprinkle Satonat Satin Finishing Plaster over it. Wait approximately 2-3 minutes for the plaster to absorb the water. Mix with a hand mixer or trowel until a homogeneous mixture is obtained. Apply the ready-to-use mortar to the surface using a steel trowel.

PACKAGING

30 kg polypropylene bag (+- 2%)

STORAGE

Stock a maximum of 20 bags on top of each other in a dry place. Store the bags without touching the ground, protected from moisture and condensation. Must be used within 9 months of the date of manufacture.